23-10-2018, 11:10 PM
(This post was last modified: 23-10-2018, 11:15 PM by KENNYGLIDE.)
Black 2.5 is working great for the wings...using 3mm on fuselage... 5mm on rudder.. ailerons. N .. horizontal stab and elevator....saving weight on the fuse as it is supposed to be 4mm but the 5mm on the aforementioned parts is a little heavier than the recommended 4mm.so should even out....the fuse feels plenty strong enough...also using 5mm flute for the formers instead of the ply..will use thin MDF for the firewall as it will only have to hold an electric motor.... Used light
5mm pine for the spars........still a work in progress ... fingers crossed it will fly better than the Delta Wings.? Just thought this info my help Marcel as the recommended 2mm. and 4mm is hard to get,.although can be purchased at a place in Rocklea.
5mm pine for the spars........still a work in progress ... fingers crossed it will fly better than the Delta Wings.? Just thought this info my help Marcel as the recommended 2mm. and 4mm is hard to get,.although can be purchased at a place in Rocklea.
MAKING MODELS IS MEDICINE FOR THE MIND 
